KMR OR DOCTER, VORTEX VENOM VIPER MOUNTING KIT FOR L-02, W-02, STEEL BLACK

Mounting plate serving as a reduction between the Optics Ready interface and optoelectronic sights.

Base plate for optics ready (OR) KMR pistol models for C-More RTS / STS collimators

Weapon compatibility
W-02 UMBRA OR
W-02 CUDA OR
L-02 UMBRA OR SR
L-02 SPECTRA OR
L-02 EMIG OR
Compatibility with collimators
Shield
Base plate specifications
material – steel
made in the Czech Republic
original CZ product
installation screws in the package
Plate installation
For OR weapons, you first unscrew the cover of the bolt on the weapon, then carefully clean and degrease the area where the plate is to be placed. Then it is enough to install the appropriate base plate and properly tighten with the included screws. We recommend sticking the screw threads with e.g. blue Loctite. You are just installing the collimator itself on this plate, where again we recommend sticking the threads of the screws with Loctite for greater strength.

Note: For collimators where it is not possible to replace the battery from the side (e.g. Holosun), but the collimator needs to be removed from the weapon during replacement (e.g. Shield, Trijicon RMR, etc.), we recommend thread glue that can still be loosened (blue Loctite) – don’t use a red one that you can’t tear off, or you could potentially damage the thread.

KMR L-02 EMIQ (OR)
KMR L-02 SPECTRA (OR)
KMR L-02 UMBRA (OR) SR
KMR W-02 CUDA (OR)
KMR W-02 UMBRA (OR)